How To Repair Hole In Wood Garage Door

Download Article

Download Article

It'due south very like shooting fish in a barrel to damage forest and create a large hole. Whether your item is a wooden wall or a piece of furniture, you can easily repair it using some craft sticks and wood filler. Once you lot've covered the hole with wood filler, prime and paint it to give it a smooth, new finish.

1. 1

   Gather your materials. Select water-based wood filler, primer, and pigment if the item you are repairing is kept indoors, or solvent-based wood filler and oil-based primer and paint if the item volition exist placed outdoors. You'll as well need craft sticks, dispensable plates, PVA glue, wood gum, 120-dust sandpaper, and paintbrushes or rollers.^[1]

   • Get together old clothes, rags, a sheet or drop material, painter's tape, and a paint stirrer too.

2. 2

   Mucilage craft sticks together to comprehend the hole. The craft sticks will provide a support for you to apply the wood filler to. Inspect the size of the hole and determine how many craft sticks it would take to embrace it.^[2]

   • For example, if a hole can be filled by 3 craft sticks, lay them flat on a work surface next. Cascade glue over the back of the three craft sticks. Identify 3 more craft sticks on top of the get-go 3 to create a strong layer that'due south stuck together properly.
   • The amount of craft sticks y'all'll have to utilize depends on the size of the hole.
   • Requite the glue ten to fifteen minutes to dry.

   Advertisement

3. 3

   Place the craft sticks on the dorsum of the hole and secure them with woods glue. Identify the gum around the border of the hole in your wood. Yous should lay the craft sticks on the side they won't be seen from. If you're filling a hole in a cabinet, wall, or a wardrobe, identify the craft sticks on the inside of the hole.^[3]

   • If you're roofing a hole in a wall or wood that you tin't place on a flat surface, you might need to hold the craft sticks for 5 minutes and then they stick to the mucilage.

   Advertisement

1. 1

   Mix your woods filler using a arts and crafts stick and a disposable paper plate. Follow the directions on the tin of the wood filler you're using. Directions vary depending on the manufacturer. There'south no need to mix a large amount of wood filler. A small corporeality of forest filler on the plate will practice the chore.^[4]

   • Ensure that the room is well ventilated equally wood filler has a very potent smell.
   • The filler is fully mixed when it turns orange-dark-brown in color.

2. 2

   Apply the woods filler to the arts and crafts sticks to fill the hole. One time your forest filler is mixed, use it apace. Apply the filler to the arts and crafts sticks using another craft stick or a putty knife. The craft sticks will human action every bit a support for the wood filler. The filler should exist level and even with the surface of the woods.^[v]

3. iii

   Let the filler dry out for i 60 minutes before using 120-grit sandpaper on it. Once the filler is dry, rub it with 120-grit sandpaper. Y'all will need to use a decent corporeality of pressure when rubbing the filler with the sandpaper. Keep using the sandpaper until information technology's level with the rest of the wood.^[6]

   • If you're using a pad sander on the filler, use 220-grit sandpaper instead. Pad sanders are handheld devices that can powerfully sand wood.

4. four

   Use a cloth to clean the forest and remove the dust. Agree your cloth under the tap for a couple of seconds and wipe the area of the wood you lot just filled in. Yous might need to wipe the area a couple of times if the pigsty was very big or if you used a lot of filler.^[7]

   • Wiping the surface area with a textile is likewise necessary before y'all prime the wood.

   Advertisement

1. 1

   Identify a sheet on the floor or on your work surface earlier yous prime. If y'all're painting a wooden wall, identify a sheet on the floor to grab whatever drips of paint. If you're painting a wooden cabinet or another item that you can move, identify information technology on top of a sheet to ensure maximum protection for the surrounding area.^[eight]

   • Motion any article of furniture away before you pigment. If the furniture is also big to move, cover it with another canvas.
   • Comprehend baseboards, hinges, and other items with painter's tape if you need to.

2. 2

   Use a primer to the woods. Primer makes it easier for the paint to stick to the surface of the item yous're painting. If you're painting a wooden wall and y'all take the paint you used for the remainder of the wall when yous originally painted it, you'll just need to prime the area you filled in with woods filler. If you lot want to paint the entire area of the wooden object, you'll demand to prime it all.^[9]

   • Utilise a roller to prime a wall and a paintbrush to prime smaller objects.

3. three

   Give the primer iii hours to fully dry. Primer can dry inside two hours of being applied to an particular. Withal, if y'all paint the primer before it's dry out, yous'll ruin the detail you lot're painting. By giving it iii hours to fully dry, you permit for the primer to dry out completely.

   • Don't paint over the primer before it'due south completely dry out. Primer can feel dry to the touch without being fully dry.

4. 4

   Employ the first coat of paint to the forest. One time the primer has completely dried, utilize a paintbrush or a roller to apply the showtime glaze to the wood. Rollers will work best on walls and other apartment surfaces. Paint other surfaces using a flat or tapered paintbrush.^[x]

   • If you're only painting over the filler, use the same pigment you painted the remainder of the item with. If you lot tin't find that paint, go to the local paint shop and take paint strips. Concord these strips to the forest to find the right color of pigment.
   • Don't be agape to use plenty of paint. It's ameliorate to apply too much paint to the item than as well trivial. Brand sure you castor the paint so it evenly covers the surface of the item.
   • Utilise even and measured strokes similar you used to apply the primer.

5. v

   Give the beginning glaze 2 to 3 hours to completely dry. You should give the pigment time to properly dry into the wood. This will take 2 hours at the very least. Test if the paint is dry by dabbing information technology with a tissue. Inspect the tissue after for signs of paint. If in that location's no pigment on the tissue, the paint is dry and you can utilise the second glaze.^[11]

   • Consider leaving the paint dry overnight to ensure it's completely dry.

6. 6

   Use the second coat of paint to the wood. After the first coat has fully dried, utilize even and measured strokes once more to apply the second coat. Once yous finish applying the second coat, wait at the wood and decide if it needs another coat. If the pigment doesn't await correct on the forest, it will probably need another glaze.^[12]

7. 7

   If you lot decide to use some other coat, follow the procedure once again. Requite the 2d coat 2 to 3 hours to dry before painting the third coat.

   Advertisement

Add New Question

• Question

  Can I just sand the wood around a gouge to make information technology even?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Possessor of Tanglewood Works out of Hyattsville, Maryland. With over nine years of experience, Sue specializes in upcycled painted furniture and other handmade, personalized, and sustainable appurtenances. With her passion for fine art and reinvention, marketing feel, and Available's Degree in Broadcast Media, Sue has been able to create a business organization that not only provides quality pieces but empowers customers to create their works through her library of DIY tutorials and alive demos too as DIY supplies.

  

  DIY & Upcycling Specialist

  Expert Answer

  You can, but that'due south going to be a lot of sanding. Unless you're dealing with a very thin scratch or gouge, this is probably an inefficient fashion to get about information technology.

• Question

  Why do I have to sand the woods filler down after it dries?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Owner of Tanglewood Works out of Hyattsville, Maryland. With over ix years of experience, Sue specializes in upcycled painted piece of furniture and other handmade, personalized, and sustainable goods. With her passion for art and reinvention, marketing feel, and Bachelor's Degree in Broadcast Media, Sue has been able to create a business organisation that not only provides quality pieces but empowers customers to create their works through her library of DIY tutorials and live demos also as DIY supplies.

  

  DIY & Upcycling Specialist

  Skilful Answer

  Well, you don't take to sand information technology down, but information technology'due south going to stand up out pretty desperately if you don't. Sanding helps to create a uniform texture earlier you paint or stain it.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

• The higher up method can be used for all types of wood including teak.

Thanks for submitting a tip for review!

Advertisement

Things Yous'll Need

• Craft sticks
• Glue
• Wood glue
• Woods filler
• Disposable plate
• 120-dust sandpaper
• 220-grit sandpaper and pad sander (optional)
• Cloth
• Water-based paint for indoors
• Oil-based paint for outdoors
• Paintbrush
• Roller
• Tissue
• Primer
• Sheets
• Painter'south tape

About This Article

Article Summary X

If you've noticed a large hole in a piece of forest or furniture, you can set it with a few supplies from your local home comeback store. If the wood'due south kept indoors, use a water-based woods filler, primer, and paint, merely if it's kept outdoors, use a solvent-based wood filler, oil-based primer, and paint. You'll likewise need sandpaper and a paintbrush or roller. To make full the pigsty, you'll need to apply the wood filler. Once information technology's dried later on an hour or and then, sand the surface to make it smooth. Then, prime and paint the surface so information technology blends in with the residue of the wood. You lot'll need to look 2 to 3 hours between coats of primer and pigment. For more tips, including how to cover use craft sticks to help encompass a hole from the inside, read on!

Did this summary help you lot?

Cheers to all authors for creating a page that has been read 76,790 times.

Did this commodity help you?

Source: https://www.wikihow.com/Fill-Large-Holes-in-Wood

Posted by: morsegratch.blogspot.com

Share this post